Commercial & industrial electrical services, New ZealandOffice Mon–Fri 7.30am–5.00pm · 24/7 call-outs · info@phasesafe.co.nz

Installation and projects

Industrial and commercial electrical work

Three-phase power, machinery connections, distribution and lighting for industrial and commercial buildings.

Phase Safe Electrical does industrial and commercial electrical work for warehouses, workshops, plants and light manufacturing sites across New Zealand, from bases in Wellington and Auckland. That covers three-phase power, machinery connections and isolation, sub-boards for plant, lighting for high ceilings and planned shutdowns, carried out by licensed electricians who plan around your production and certify the work.

What does an industrial electrician do?

An industrial electrician installs, connects and maintains the electrical systems that run production and storage buildings: three-phase supplies, distribution boards, motor and machinery circuits, isolation, lighting for high ceilings and the cabling between them. The work is the same trade as commercial electrical work, but the loads are bigger, more equipment is three-phase, and downtime costs more, so planning and isolation matter as much as the wiring.

Most sites need both: a warehouse has offices as well as racking, so we cover the whole building, from the main switchboard to the last machine.

Some industrial sites also have hazardous areas, where flammable gas, vapour or dust can form an explosive atmosphere. The Electricity (Safety) Regulations 2010 require installations in those areas to comply with AS/NZS 60079.14, and to be periodically assessed under AS/NZS 60079.17, so equipment there is chosen and checked differently. Our hazardous area inspections page explains what that involves.

What is three-phase power?

Three-phase power is a supply with three live conductors, each carrying alternating current a third of a cycle apart from the others. The Electricity (Safety) Regulations 2010 define standard low voltage on a New Zealand MEN supply as 230 volts between phase and neutral. Between any two phases of a three-phase supply that works out at about 400 volts, which is 230 multiplied by the square root of 3 (about 1.73).

Because the three phases peak in turn, power flows more evenly, which suits motors and other heavy, continuous loads.

Single-phase or three-phase: which does your site need?

Single-phase power suits lighting, office equipment and smaller tools. A site generally needs three-phase when it runs larger motors, compressors, welders, ovens or several heavy machines at once, or when total demand is more than a single-phase supply can comfortably carry. A machine's nameplate and installation instructions state which supply it needs, so check them before you buy.

Single-phase Three-phase
Live conductors One Three
Voltage 230 V phase to neutral 230 V phase to neutral, about 400 V between phases
Typical loads Lighting, office equipment, small tools Motors, compressors, welders, larger machinery

If the building has only a single-phase supply, adding three-phase usually involves the local lines company and your electricity retailer as well as an electrician. We check the supply and switchboard and set out the options before you buy.

How are machines connected and isolated?

Each fixed machine needs a correctly sized circuit with suitable protection, cabling that suits the environment it runs through, and a means of isolation so it can be switched off and locked off for maintenance. We connect new and relocated machinery, add isolators where they are needed, and label circuits so your team knows which switch controls what. Each connection is tested and certified when it is complete.

When layouts change, plan power for the new machine position before the machine arrives.

When does plant need its own sub-board?

A sub-board, or distribution board, makes sense when a group of machines or a new area of the building needs its own circuits close to the load. It shortens cable runs, keeps faults local, and lets you isolate one area without shutting down the whole site. Whether the main switchboard has the capacity to feed it is the first thing we check.

If the main board is at capacity or out of date, the work may need to start there. Our page on distribution boards and switchboards explains upgrades, sub-boards and how a shutdown is planned.

What lighting suits a warehouse or workshop?

Tall warehouse and workshop spaces usually need high-bay LED fittings, which direct light down from a high ceiling onto floors and between racking. Lower workshops and storage areas suit low-bay or linear fittings. Good industrial lighting puts light where the tasks happen, and avoids glare and dark aisles.

Fitting choice, layout and controls are covered on our electrical projects and lighting upgrades page, along with fitouts and new installations.

How do planned shutdowns work?

A planned shutdown is a scheduled period when power to part or all of a site is turned off so work can be done safely, such as connecting a new board or replacing a main switch. We agree the date, scope and sequence with you in advance, prepare materials and pre-wire what we can beforehand, then restore power in a set order so the site is running again as soon as possible.

If a shutdown must happen outside production hours, raise it when you book. For breakdowns between planned jobs, we offer 24/7 call-outs for electrical faults, and regular planned maintenance reduces how often you need them.

Frequently asked questions

Is 230 V single-phase or three-phase?

In New Zealand, 230 volts is the standard single-phase voltage, measured between one phase and neutral. A three-phase supply gives 230 volts from each phase to neutral and about 400 volts between any two phases. An ordinary 230-volt outlet is single-phase, even in a building fed by three-phase.

What are L1, L2 and L3?

They are the labels for the three phase conductors in a three-phase supply. Each carries 230 volts to neutral, and the voltage between any two of them is about 400 volts. Load should be spread evenly across all three, because an unbalanced board works one phase harder than the others, which can lead to overheating and nuisance tripping.

Can a three-phase machine run on single-phase power?

Not directly. Some smaller three-phase motors can be run from a single-phase supply through a phase converter or a suitable variable speed drive, but it depends on the motor size and the manufacturer's instructions. For larger machinery, or several machines, a three-phase supply is usually the practical answer.

Which areas do you cover for industrial electrical work?

We work for commercial and industrial clients across New Zealand, from bases in Wellington, at Gracefield in Lower Hutt, and Auckland, at Rosedale. Tell us where your site is and what the job involves, and we will confirm how we can help and how the work would be planned.

Sources