Commercial & industrial electrical services, New ZealandOffice Mon–Fri 7.30am–5.00pm · 24/7 call-outs · info@phasesafe.co.nz

Inspections and testing

Electrical inspections and reports for insurance compliance

When your insurer asks for evidence the electrical installation is safe, we inspect, fix what is needed and give you the report.

When an insurer asks a commercial property owner for evidence that the electrical installation is safe, Phase Safe Electrical carries out the inspection, fixes what it finds, and gives you the report and certificates to send back. Insurers' requirements vary, so send us what your insurer has asked for and we will scope the work to match it. We work for commercial and industrial clients across New Zealand, from bases in Wellington and Auckland.

What do insurers ask for on electrical safety?

Insurers' requirements vary by insurer, policy, building and business, so the starting point is always the letter, survey report or renewal condition you have received. What insurers commonly ask commercial property owners for falls into four groups: an inspection or periodic verification report, a thermographic scan of switchboards, evidence of regular electrical maintenance, and certificates for electrical work.

What the insurer may ask for What it usually means How we provide it
Electrical inspection or periodic verification report A documented check of the installation's condition, with defects listed An electrical inspection to the agreed level, with a written report
Thermographic survey An infrared scan of switchboards under load, with hot spots identified Our thermal imaging service, with findings ranked for repair
Evidence of maintenance Proof that an electrician checks the system regularly and acts on findings Inspection records and a planned maintenance programme
Certificates for remedial work Proof that defects have been fixed properly Certificates of Compliance for prescribed electrical work

These examples come from published insurer risk guidance: Vero sets out three levels of periodic verification and recommends yearly thermographic checks under load, and NZI recommends regular electrical inspection and maintenance plus a thermographic survey. Your insurer may ask for something different.

Why insurers focus on electrical risk

Electrical faults are one of the main causes of fire in commercial buildings, and a fire disrupts a business long after the damage is repaired. NZI reports that between 2016 and 2023, 1 in 5 of its significant commercial property damage claims were caused by electrical fire. Insurers ask for inspections and scans because many electrical defects give no warning until they cause damage.

NZI lists electrical faults among the leading causes of commercial fires in New Zealand. A loose connection or an overloaded circuit can run hot for a long time before it fails. An inspection and a thermal scan find these problems before they cause damage, which is why insurers treat them as evidence that the risk is being managed.

How we handle an insurer's request

We work from the insurer's own wording, so the report answers the question they asked. The process has five steps: you send us the request, we confirm the scope against it, we inspect and test, our electricians fix the defects you approve, and we give you the documents to send back. Where the request is unclear, we suggest you check the wording with your broker before work starts.

  1. Send us the request. Forward the insurer's letter, risk survey or renewal condition, with any deadline.
  2. Scope. We confirm the inspection level, boards and tests the request needs.
  3. Inspect. We inspect and test, and scan switchboards if thermal imaging is required.
  4. Fix. We report the defects by priority and quote the remedial work. You choose what to approve.
  5. Close out. You receive the report, evidence that the items have been fixed, and Certificates of Compliance for the repair work.

What does the insurance inspection report include?

The report states what was inspected and tested, the standard or method used, the results, and each defect with its location and priority. Where we have fixed items, the report or a close-out letter records what was done and when. Anything we could not access is noted, so your insurer can see exactly what the report covers and what it does not.

  • Scope and method. What was included and the level of testing.
  • Findings. Defects ranked from immediate to plan to monitor, each with its location.
  • Thermal results. Hot spots with their location and the recommended action, if a scan was included.
  • Remedial work. What has been fixed and the certificates issued.

Keep every report: year-on-year reports show your insurer the installation is being looked after.

Fixing defects and closing out the request

An insurer usually wants to know that the defects found have been fixed, not just recorded. Our electricians carry out the remedial work, from tightening and replacing connections to replacing old fuses, adding RCD protection and repairing damaged cables. General and high-risk prescribed electrical work is certified with a Certificate of Compliance, which forms part of the evidence you send back.

If a switchboard is beyond repair, our page on switchboard upgrades explains how replacement works. For a whole site or a property portfolio, a switchboard survey gives a board-by-board plan that also answers many insurer questions.

Frequently asked questions

Does my insurer require an electrical inspection?

It depends on your insurer, policy and building. Some insurers ask for an electrical inspection or a thermographic scan; others only recommend it. Vero's checklist for building owners, for example, asks whether periodic verification has been done on older buildings or systems showing wear. Check your policy wording and any risk survey, or ask your broker. Then send us what your insurer has asked for and we will scope the inspection to match.

How often do insurers want a thermal scan?

It varies. Vero's risk guide for businesses recommends thermographic checks at least once a year, carried out under load, with results documented and faults acted on. Other insurers may set a different interval or none at all. If your insurer has not specified one, a yearly scan as part of planned maintenance is a sensible baseline to discuss with your broker.

Can you fix defects listed in another company's report?

Yes. If your insurer or another contractor has already produced an inspection or thermal report, send it to us with the insurer's request. Our electricians can quote for the remedial work it lists and carry it out, and we provide Certificates of Compliance for the work so you can show the insurer the items are closed.

Will an electrical inspection lower my insurance premium?

We cannot promise that, because premiums are set by insurers. What an inspection does is give the insurer evidence that the electrical risk is being managed, and NZI's guidance treats catching electrical fires before they start as central to protecting a business. Ask your broker whether your insurer takes inspection reports into account.

Sources