Commercial & industrial electrical services, New ZealandOffice Mon–Fri 7.30am–5.00pm · 24/7 call-outs · info@phasesafe.co.nz

Maintenance and troubleshooting

Planned and predictive electrical maintenance

Scheduled maintenance and condition monitoring that find problems early, so repairs happen when it suits you.

Planned and predictive electrical maintenance means checking, testing and servicing your installation on an agreed schedule, and using evidence such as thermal scans and test results to decide what needs fixing before it fails. Phase Safe maintains switchboards, lighting, plant connections and protective devices for commercial and industrial clients across New Zealand, from bases in Wellington and Auckland, and plan the work around your operations.

What is the difference between planned and predictive maintenance?

Planned maintenance, also called preventive maintenance, happens on fixed dates: the same checks every quarter or every year, whatever condition the equipment seems to be in. Predictive maintenance, or condition-based maintenance, measures how equipment is actually behaving and acts when the evidence shows a problem developing. Most commercial sites need both: a schedule so nothing is missed, and condition monitoring to decide which repairs come first.

Approach When the work happens Examples
Reactive After something fails A tripping circuit, a dead outlet, plant that won't start
Planned (preventive) On dates you agree Visual checks of boards, RCD tests, checking terminations, lighting checks
Predictive (condition-based) When results show a problem developing Hot spots on a thermal scan, a board near capacity

When something fails without warning, our fault finding and 24/7 call-outs cover it, and the cause goes into the plan.

What does condition monitoring involve?

Condition monitoring is the evidence behind predictive maintenance: measuring how the installation performs so problems show up while they are still cheap to fix. On electrical systems the main tools are thermal imaging of switchboards and connections under load, electrical tests such as insulation resistance and RCD trip tests, and load on each phase. Comparing results visit to visit shows trends a single check misses.

Our thermal imaging service finds loose connections, overloaded circuits and failing components while the site keeps running. A switchboard survey records the condition and capacity of every board, which gives the plan its starting point.

What goes into an electrical maintenance schedule?

A maintenance schedule lists each part of the installation, what is checked, how often, and who is responsible. Intervals depend on the age and condition of the equipment, how hard it works and the environment it sits in, so a dusty workshop board is checked more often than one in an office riser. We agree the schedule with you and record every visit against it.

A schedule can cover:

  • Main switchboards and distribution boards: signs of heat, damage or moisture, terminations, labelling and spare capacity
  • Protective devices: RCD trip tests and the condition of breakers and fuses
  • Lighting: failed fittings, controls and high-bay lighting, plus emergency lighting where it is on your compliance schedule
  • Plant and machinery: isolators, motor connections and control panels
  • Thermal scans: boards and key plant, at an interval your insurer or risk profile sets
  • Portable equipment: test and tag by certified testers, on its own cycle

How does maintenance tie into your compliance schedule?

If your building has a compliance schedule, the Building Act 2004 makes the owner responsible for keeping each specified system performing to its performance standards and for supplying a building warrant of fitness every year. Several specified systems rely on electrical supply and controls, including emergency lighting, emergency power systems, and mechanical ventilation or air conditioning. Planning both together saves visits.

The compliance schedule sets the inspection, maintenance and reporting procedures for each system, and the warrant of fitness must have certificates from an independently qualified person (IQP) attached, showing those procedures were followed over the previous 12 months. Lining up the dates means repairs an inspection turns up are done before the warrant is due. Our BWOF and IQP inspections page covers that side: tell us which specified systems are on your compliance schedule and we'll confirm what we inspect.

Why does planned maintenance matter for health and safety?

Under the Health and Safety at Work Act 2015, a business must ensure, so far as is reasonably practicable, that its plant and work environment are provided and maintained without risks to health and safety. The Electricity (Safety) Regulations 2010 add that an owner or operator must not use, or let anyone else use, an installation or appliance that is electrically unsafe. A maintenance record is how you show both are being managed.

Can maintenance be done without disrupting the site?

Usually, yes. Most inspection, testing and thermal scanning happens with the site running, and thermal imaging needs equipment under normal load to work at all. When a board or circuit has to be isolated for repairs, we plan it with you: an early start, a quieter trading period, or staged shutdowns so only one area is off at a time. Planned repairs are also quicker, because parts are ordered in advance.

What paperwork do you get after maintenance?

You get a visit record listing what was checked, what was found and the repairs we recommend, ranked by risk. When a repair is general or high-risk prescribed electrical work, the regulations require a Certificate of Compliance (CoC), and an Electrical Safety Certificate (ESC) once the installation is connected and safe to use. The ESC must be issued within 20 working days of connection, and a copy goes to whoever contracted the work.

Frequently asked questions

How often should a commercial building have electrical maintenance?

There isn't one interval for every building: it depends on the installation's age, use and environment. Some items have their own cycles: portable equipment follows AS/NZS 3760 test intervals, emergency lighting follows your compliance schedule, and insurers may expect yearly thermal scans. A maintenance plan brings those dates together so nothing slips.

Is planned maintenance the same as a BWOF inspection?

No. A building warrant of fitness confirms that the specified systems on your compliance schedule have been inspected, maintained and reported on as the schedule requires. Planned electrical maintenance covers the wider installation: switchboards, lighting, power and plant connections that aren't specified systems. Planning the two together cuts the number of visits.

Can you take over an existing maintenance plan?

Yes. Send us your current schedule, the last few visit reports and any thermal imaging or test results you hold. We'll point out gaps and agree the scope and dates with you. Previous records let us spot trends from the first visit.

Is test and tag part of electrical maintenance?

It can be. Test and tag covers portable equipment on flexible cords, tested against AS/NZS 3760 by certified testers. Electrical maintenance covers the fixed installation: wiring, switchboards, lighting and machinery connections. Most workplaces need both, and they can be booked for the same visit.

Sources