Commercial & industrial electrical services, New ZealandOffice Mon–Fri 7.30am–5.00pm · 24/7 call-outs · info@phasesafe.co.nz

EV charging guide

How much does commercial EV charger installation cost in NZ?

Indicative published figures, and the site factors that move a quote up or down.

Updated 16 November 2026

A published New Zealand commercial charging cost guide from August 2026 puts a wall-mounted AC charger in a commercial car park at around $6,000 fully installed, and a DC fast charger at $40,000–$100,000 for the hardware plus $15,000–$60,000 to install. EECA puts smart charger hardware at $1,500–$2,000. These are indicative figures, not Phase Safe prices. For what the work involves, see our commercial EV charger installation and maintenance page.

How much does a commercial EV charger cost to install?

Published 2026 figures put a single wall-mounted AC charger in a commercial car park at around $6,000 installed, with the hardware alone at $1,500–$3,000 depending on the unit. DC fast chargers cost far more: $40,000–$100,000 per station before installation. The total for your site depends mostly on how many chargers you need, how far they are from the switchboard and whether the supply can carry them.

The table brings together the published figures we could open and check on 16 November 2026. Treat them as a starting point for budgeting, not a quote.

Item Indicative figure Published source and date
Smart AC charger, hardware only $1,500–$2,000 EECA, workplace EV charging page
Single-port public AC charger, hardware only $1,950–$3,000 NZ commercial charging cost guide, August 2026
Wall-mounted AC charger in a car park, installed Around $6,000 NZ commercial charging cost guide, August 2026
Kerbside or pedestal AC charger, installed More than wall-mounted, because of trenching or boring NZ commercial charging cost guide, August 2026
DC fast charger, hardware only $40,000–$100,000 per station NZ commercial charging cost guide, August 2026
DC fast charger, installation only $15,000–$60,000 NZ commercial charging cost guide, August 2026

The commercial guide does not say whether its figures include GST, so check the GST basis of any quote you compare with them. GST is charged at 15%, and a GST-registered business can usually claim it back.

Why installation is the bigger cost for AC chargers

For AC chargers, the hardware is not the main expense. The August 2026 guide says installation typically makes up 60–80% of the total, driven mainly by the distance between the charger and the switchboard. It puts typical cable runs at 15–30 metres and says runs beyond 40 metres are usually costly enough that moving the charger or the supply point is worth considering.

A charger on a basement wall a few metres from a distribution board is a short, simple job. The same charger on a pedestal 50 metres away in an open car park needs trenching, a footing, vehicle protection and a heavier cable. EECA makes the same point: installation costs vary with the number of chargers, the capacity available and where the chargers sit in relation to the distribution board.

What does a DC fast charger cost?

DC fast chargers reverse the pattern: the hardware is usually the biggest cost. The August 2026 guide puts DC hardware at $40,000–$100,000 per station, depending on power output and model, with installation adding $15,000–$60,000. The installation figure is high because a DC charger draws far more power than an AC unit, so it often needs a supply upgrade, a new transformer or substantial switchboard work.

Before choosing a DC charger, confirm what the site's supply can deliver and what the local network would need to do to increase it. For many workplaces and fleets that park for hours, several AC chargers with load management do the same job for far less.

What moves the price of a commercial EV charger installation?

Ten things move a commercial EV charging quote more than anything else: supply capacity, switchboard space, cable distance and route, mounting type, the number of chargers, load management, site and civil works, connectivity, access and timing, and certification. The table shows how each one affects the price, so you can see why your site may sit above or below the published figures.

Cost driver Why it matters Effect on price
Supply capacity Chargers add a large, steady load. If the connection can't carry it, the network may need to upgrade it. Can add network charges and lead time.
Switchboard space and protection Each charger needs its own circuit and protection, which needs spare ways, or a sub-board. Rises if the board must be extended or replaced.
Cable distance and route Longer runs need heavier cable; routes through concrete, asphalt or ceilings take longer. Usually the biggest variable for AC chargers.
Mounting type Wall mounting is simplest. Pedestals need footings and usually trenching. Higher for kerbside or pedestal units.
Number of chargers Several chargers share trenching and set-up costs, but add load. Lower per charger, higher in total.
Load management Shares the supply between chargers so the connection may not need upgrading. Can avoid the largest single cost.
Site and civil works Trenching, cores, footings, bollards or wheel stops, line marking and signage. Adds materials and labour.
Connectivity Networked chargers need a mobile or wired data connection for access and billing. Adds hardware and set-up.
Access and timing Live car parks, height limits or after-hours work slow the job down. Higher for difficult access or out-of-hours work.
Testing and certification Every charger circuit is tested and certified, with charger-specific checks. Built into a complete quote, not optional.

Supply upgrades, switchboards and network charges

If your chargers need more power than the site can draw, some costs come from outside the electrical quote. A capacity change needs confirmation from the local network before work starts, your electricity retailer handles the metering, and each sets its own charges. Supplies of 101 amps or more need current transformers at the switchboard for metering, which can add switchboard work.

One retailer's published process notes that some networks invoice customers directly for their work, on top of the retailer's own charges, so ask for both early. On the switchboard side, our guide to what a switchboard upgrade costs sets out published NZ ranges for commercial boards. Load management, which caps how much the chargers draw at once, is often the cheaper alternative to a bigger supply.

Ongoing costs after installation

The installation is not the last cost. Chargers need regular inspection, testing and the occasional repair, because cables and connectors wear quickly in a busy car park. Networked chargers may carry software or data charges for access control and billing. And chargers open to the public bring an annual periodic assessment under WorkSafe's EV charging safety guidelines, which is worth budgeting for from the start.

The 2019 edition of the guidelines recommends that public chargers are assessed within a year of connection and at least every 12 months after, by a person authorised under the Electricity Act, with a tag showing the expiry date. Staff-only chargers fall outside that definition but still need maintenance. Folding them into a planned maintenance programme keeps the cost predictable.

How to get an accurate quote

An accurate quote comes from a site visit, because the cost depends on your supply, your switchboard and your car park, not just the charger. Giving every contractor the same brief, and asking for the same breakdown, is the easiest way to compare quotes fairly and spot what each one leaves out.

  • Describe the vehicles. How many, how far they drive each day, how long they park, and whether staff, fleet or visitors will use the chargers.
  • Share what you have. Photos of the switchboard, a site or car park plan, and recent power bills showing the site's peak demand.
  • Plan for growth. If you expect more vehicles, laying spare ducts while a car park is open for trenching is usually cheaper than trenching twice.
  • Ask for a full scope. The quote should list chargers, cabling, switchboard work, load management, site works, connectivity, testing and certificates.
  • Ask what is excluded. Network and metering charges, supply upgrades and after-hours work are the usual exclusions.

Phase Safe quotes every charging project after a site assessment, including the associated building and site works.

Frequently asked questions

How much does it cost to set up EV charging for a business?

It depends on the number and type of chargers and on the site. A published NZ guide from August 2026 puts one wall-mounted AC charger in a commercial car park at around $6,000 installed, and a DC fast charger at $40,000–$100,000 for the hardware plus $15,000–$60,000 to install. A multi-bay project with trenching or a supply upgrade costs more. Only a site assessment gives a firm figure.

Is installation included in the price of a commercial EV charger?

Usually not. Charger prices from suppliers are generally for the hardware alone, and EECA puts a smart charger at $1,500–$2,000 for hardware. Installation, switchboard work, site works, connectivity and certification are extra. For AC chargers, the published August 2026 guide says installation is typically 60–80% of the total cost.

Can load management reduce the cost of EV charging?

Often, yes. Load management shares the available supply between chargers, so a site can run more charging points without paying for a bigger connection, which can be the largest single cost in a project. EECA notes that smart chargers give you control over charging load and may save you the need for an electricity supply upgrade.

Do EV charger installation prices include GST?

Not always. Some published figures exclude GST, some include it, and some don't say, including the commercial guide quoted on this page. GST is 15%. A commercial quote normally shows GST separately, and a GST-registered business can usually claim it back, so compare quotes on the same basis.

Sources